SRP 600
OVERVIEW
The SRP 600 is a new near field active reference monitor. This SRP adds loudness, clarity and bottom end to the compact SRP 500. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 6.5" kevlar woofer produces deep bass and exceptional transient response. A new 80 + 50 watt biamplifier drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 108dB. DSP based internal processing with high quality ADC and DAC is employed for the crossover and also provides the 0.75dB step calibrated HF and LF room compensation EQs at the rear. On the front is a level control ranging from mute to +6dB with centre detent at 0dB. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 600 accepts both XLR and TRS balanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white.
SPECIFICATIONS
| DESCRIPTION | 2 way biamplifier speaker |
| TRANSDUCER COMPLEMENTS | LF: Magnetically shielded 6.5" kevlar cone woofer in die-cast chassis |
| HF: Magnetically shielded 26mm silk dome tweeter with custom waveguide | |
| ENCLOSURE TYPE | Vented, through front-firing aerodynamic port |
| ENCLOSURE MATERIAL | Pressure die-cast aluminum |
| OVERALL FREQ. RESP. (±2dB) | 48Hz ~ 21kHz |
| USABLE FREQ. RANGE (-10dB) | 42Hz ~ 25kHz |
| MAX. LONG TERM SPL, 1/2 SPACE | 107dB |
| HORIZONTAL BEAM WIDTH | 86° (averaged b/w 5~16kHz) |
| VERTICAL BEAM WIDTH | 69° (averaged b/w 5~16kHz) |
| TOTAL HARMONIC DISTORTION (@ 95dB SPL) | 80Hz ~ 200Hz < 3%; > 200Hz < 1% |
| AMP. POWER BEFORE CLIPPING | LF: 80W, HF: 50 W |
| S/N RATIO (AT UNITY GAIN) | > 90dB, referred to full output |
| AMP. THD AT RATED POWER | < 0.04% |
| INPUT: | Fully balanced through XLR & TRS sockets |
| INPUT LEVEL FOR 90dB SPL @1M | +7dBU |
| CMRR | >65dB |
| CROSSOVER FREQ | 2kHz |
| GAIN CONTROL RANGE | -70dB ~ +10dB, 0dB at (detented) centre |
| LOW SHELVING EQ | 50Hz ~ 250Hz, -3dB ~ +3dB in 0.75dB steps |
| HIGH SHELVING EQ | 4 kHz ~ 20 kHz, -3 dB ~ +3dB in 0.75dB steps |
| BASS ROLL-OFF | 80Hz, 12dB/ octave |
| CONTROLS : FRONT | Power Switch and Gain Control |
| CONTROLS : REAR | Low shelving, High shelving, Bass roll-off |
| INDICATOR | Power ON/OFF |
| PROTECTION | Over current, Overheat , RFI, Switch on/ off transients |
| POWER REQUIREMENT | 230VAC, ±10%, 50Hz; 115V optional |
| POWER CONSUMPTION | 175VA Max. |
| FINISH | Powder coated (G: grey / W: white / B: black) |
| DIM. (WxHxD) mm | 250 x 340 x 240 |
| NET WEIGHT | 11.9kg |
| INSERTS FOR MOUNTING | 2 x M6 inserts on rear, 4 x M6 inserts on bottom |
| WALL MOUNT BRACKET | SRP WB 2 |
