SRP 500

SRP 500

 

 

 

 

OVERVIEW

The SRP 500 is a new compact near field active reference monitor. This SRP excels at monitoring effects and other such subtleties in the mix. The enclosure is pressure die cast aluminum that maximizes rigidity and lends it a unique form. The silk dome tweeter is nested in a custom waveguide to produce on and off axis linearity and a wide, detailed soundstage. The 5.25" kevlar woofer produces deep bass and exceptional transient response. A new 50 + 50 watt biamplifier  drives the transducers optimally while providing adequate headroom and dynamics. The maximum SPL measures in at an impressive 104dB. DSP based internal processing with high quality ADC and DAC is employed for the crossover and also provides the 0.75dB step calibrated HF and LF room compensation EQs at the rear.  On the front is a level control ranging from mute to +6dB with centre detent at 0dB. Tapped inserts at the rear and bottom allow for various mounting options. The SRP 500 accepts both XLR and TRS balanced inputs and is available in the following durable powder coat finishes: rich black, charcoal grey or snow white. 

SPECIFICATIONS

DESCRIPTION 2 way biamplifier speaker
TRANSDUCER COMPLEMENTS LF: Magnetically shielded 5.25" kevlar cone woofer in die-cast chassis
HF: Magnetically shielded 26mm silk dome tweeter with custom waveguide
ENCLOSURE TYPE Vented, through front-firing aerodynamic port
ENCLOSURE MATERIAL  Pressure die-cast aluminum
OVERALL FREQ. RESP. (±2dB)  58Hz ~ 21kHz
USABLE FREQ. RANGE (-10dB) 50Hz ~ 25kHz  
MAX. LONG TERM SPL, 1/2 SPACE 104dB
HORIZONTAL BEAM WIDTH 78° (averaged b/w 5~16kHz)
VERTICAL BEAM WIDTH 62° (averaged b/w 5~16kHz)
TOTAL HARMONIC DISTORTION (@ 95dB SPL) 80Hz ~ 200Hz < 3%; > 200Hz < 1%
AMP. POWER BEFORE CLIPPING LF: 50W, HF: 50W
S/N RATIO (AT UNITY GAIN) > 90dB, referred to full output
AMP. THD AT RATED POWER < 0.04%
INPUT: Fully balanced through XLR & TRS sockets
INPUT LEVEL FOR 90dB SPL @1M +5dBU
CMRR >65dB
CROSSOVER FREQ  2.5kHz
GAIN CONTROL RANGE -70dB ~ +10dB, 0dB at (detented) centre
LOW SHELVING EQ 50Hz ~ 250Hz, -3dB ~ +3dB in 0.75dB steps
HIGH SHELVING EQ 4kHz ~ 20kHz, -3dB ~ +3dB in 0.75dB steps
BASS ROLL-OFF  100Hz, 12dB/ octave 
CONTROLS : FRONT Power Switch, Gain Control
CONTROLS : REAR Low shelving, High shelving, Bass roll-off
INDICATOR Power ON/OFF
PROTECTION  Over current, Overheat , RFI, Switch on/ off transients
POWER REQUIREMENT  230VAC, ±10%, 50Hz; 120V optional
POWER CONSUMPTION 100VA Max. 
FINISH  Powder coated (G: grey / W: white / B: black)
DIM. (WxHxD) mm 210 x 279 x 181
NET WEIGHT 6.8kg
INSERTS FOR MOUNTING 2 x M6 inserts on rear, 4 x M6 inserts on bottom
WALL MOUNT BRACKET SRP WB 2

 

SRP 800

上一个:

下一个:

下一个
本网站由阿里云提供云计算及安全服务